Reset Function - INTEZZE TRIQ Gebrauchsanweisung

Reset function

When to use it? E.g. after an unsuccessful connection to the phone or when only one
earphone is playing. However, it can help in many other situations.
1. Delete "lntezze TRIQ" from the list of paired devices on the phone. Ideally, turn off
the Bluetooth function on your phone as well.
2. Remove both charged earphones from the case and put them into your ears. You
will hear "Pairing" from the earphones.
3. Quickly tap the multifunction button on both earphones five times, a short tone
sounds, then "Power OFF" and the earphones turn off. By holding down both
multifunction buttons for three seconds, the earphones will turn on again and you
will hear "Power ON".
4. After a short time, "Pairing" is heard in the earphones. This completes the reset
successfully and the earphones can be paired with the phone again.
Warranty conditions - The warranty does not cover the
following situations:
1. Damage caused by unauthorised tampering with the device.
2. Filters clogged by earwax (may not be immediately visible) or otherwise needing
cleaning. Cleaning must be done by an authorised service and a fee is charged.
3. Earbuds with their duct filters removed.
4. Physical damage to the earbuds caused by a fall or impact.
5. Damage caused by force majeure.
EN