Reset Function - INTEZZE PIKO 3 Bedienungsanleitung

Pairing one earphone (MONO)
1) Pair both earphones with your phone as described in the Pairing chapter.
2) Insert both earphones back into the case.
3) Pull out only one of the earphones after a moment. It will automatically
connect to the paired phone after a few seconds.
If you subsequently pull out the second earphone within range from the case, it
will also connect automatically and playing will continue in both earphones.
You cannot use the earphone volume setting in single earphone mode.

RESET function

If both earphones cannot be connected to your phone, we recommend resetting
the earphones as follows. After a successful reset, all previously paired devices
will be deleted from the earphone memory.
1) On your phone, remove the PIKO 3 earphones from the list of previously
paired BT devices and turn off the Bluetooth function.
2) Remove both earphones from the case (or put them into your ears). When
the earphones turn on automatically, tap the buttons on both earphones
three times at the same time. A confirmation double beep sounds in the
earphones.
3) The earphones are now reset and have to be paired with the phone again
according to the procedure in the "Pairing" chapter.
EN