Setting Up The Key Light - Rollei LUMIS Key Light Pro Anleitung

Setting Up the Key Light

30
– Fasten the tripod leg [3] in the matching thread
on the base plate [6] . To do so, screw the screw [5]
tightly into the thread at the bottom of the base
plate [6] using the supplied hex wrench [4] .
– Mount the light panel [1] on the ball head [2] of the
monopod [3] .
– Then adjust the Rollei LUMIS Key Light Pro to the desired height by
pulling the leg segments of the monopod [3] apart .
– Plug the USB-C cable [7] with the USB-C connector into the USB-C
input on the back of the LED panel [1] and connect the Rollei
LUMIS Key Light Pro to your computer via the USB-A port or to a
power supply product with a USB-A port (not included; necessary
output of the power supply product: 5 .0 V
ENGLISH
2 .0 A) .