Setting Up The Rollei Lumis Key Light; Operation - Rollei LUMIS Key Light Anleitung

Setting Up the Rollei LUMIS Key Light

16
– Fasten the tripod leg (3) in the matching thread
on the base plate (6) . To do so, screw the screw (5)
tightly into the thread at the bottom of the base
plate (6) using the supplied hex wrench (4) .
– Mount the light panel (1) on the ball head (2) of the
monopod (3) .
– Then adjust the Rollei LUMIS Key Light to the desired height by
pulling the leg segments of the monopod (3) apart .
– Connect the Rollei LUMIS Key Light to your computer via the USB-
A port or to a power supply unit with a USB-A port (not included;
necessary output of the power supply unit: DC 5 V / 2 A) .

Operation

– After having set up the Rollei LUMIS Key Light, you can switch the
light on and off using the on / off switch (9) of the remote control
on the cable of the Rollei LUMIS Key Light .
– You can set the brightness using the arrow buttons for brightness
control (7) .
– You can choose between 3 color temperatures with the help of the
mode button .
ENGLISH