Herunterladen Inhalt Inhalt Diese Seite drucken

Teesa TSA8037-2 Bedienungsanleitung Seite 16

Vorschau ausblenden Andere Handbücher für TSA8037-2:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 9
16
cautious manner, and all the safety precautions are understood and followed. Children
should not play with this device. Children should not perform cleaning and servicing of
the device unsupervised.
• Pay attention! The surface of this device will get hot. To avoid burns and personal injury,
do not let bare skin touch hot surfaces. Use handles when moving the product. Closely
supervise any children and pets when in use.
• Do not route power cord underneath the heater or in front of air ventilation grilles.
• Do not insert anything into the ventilation grill!
• ALWAYS disconnect the product form the mains supply when it is not in use.
• DO NOT use this device if the cord or the plug is damaged, or the appliance is broken.
• Do not attempt to repair this appliance yourself. Only authorized and qualified personnel
may repair this device. Never disassemble this device.
• This heater is filled with a precise quantity of special oil. In case of an oil leakage, contact
an authorized service point for repair. Do not repair this device yourself!
• Fixed power cable may only be replaced in an authorized service point.
• This product is only suitable for well insulated spaces or occasional use.
• Clean this device in accordance to instructions listed in "Cleaning and Maintenance"
section. Keep the heater clean. Do not allow any objects to enter any ventilation or
exhaust opening as this may cause electric shock, fire or damage to the heater.
Before use, mount the attached castors to the body of the heater.
EN
1. Place the radiator body upside-down on a safe, stable surface.
2. Position the wheel base assemblies between the end fins on the front and at the end of
the heater.
3. Attach them to the heater using the U-bolts and wing nuts supplied.
4. Tighten the wheel nuts.
Note: Do not overtighten as it may cause the damage of heater flange.
5. Turn the heater the right way up.
WARNING:
• Do not operate without castors attached.
• Operate the heater only in an upright position (castors on the bottom); any other position
could create hazardous situation.
ASSEMBLING CASTORS
Owner's manual

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis