Midea RG10A3B/BGEF Bedienungsanleitung Seite 7

ON/OFF
Turns the unit on or off.
TEMP
Increases temperature
in 1 C(1 F) increments. O O
Max. temperatur e is
30 C(86 F).
O O
SET
Scrolls through operation
functions as follows:
Fresh( ) 
Sleep(
Follow Me( )

AP mode( )
 Fresh...
The selected symbol will
flash on the display area,
press the OK button to
confirm.
OK
Used to confirm the
selected functions.
TEMP
Decreases temperature
in 1 C(1 F) increments. O O
Min. temperature is
17 C(62 F). O O
FAN SPEED
Selects fan speeds in the
following order:
AUTO LOW MED


NOTE: Holding this button
down for 2 seconds will
activate Silence feature.
Model:
NOTE: For models of RG10A4(B1)/BGEFU1, RG10A5(B1)/BGEFU1and RG10A5(B1)/BGCEFU1,
press together
display between the °C & °F scale. Fresh feature is not available for models of
RG10A4(B)/BGEF and RG10A4(B1)/BGEFU1.
)

Boost
HIGH

RG10A4(B)/BGEF, RG10A4(B1)/BGEFU1,RG10A5(B)/BGEF, RG10A5(B)/BGEFU1
RG10A5(B)/BGCEF and RG10A5(B1)/BGCEFU1(Cooling only models,
AUTO mode and HEAT mode are not available),
RG10A11(B)/BGEF(20-28 C).
& buttons at the same time for 3 seconds will alternate the temperature
MODE
Scrolls through operation modes
as follows: AUTO  COOL 
DRY  HEAT  FAN
ECO
Press this button to enter the
energy efficient.
TIMER
Set timer to turn unit on or off
SWING
Starts and stops the horizontal
louver movement. Hold down
for 2 seconds to initiate vertical
louver auto swing feature(some units).
CLEAN
Used to start/stop the Clean
function.
Turns indoor unit's LED display
and air conditioner buzzer on and
off (modeldependent), which
create a comfortable and quiet
environment.
Boost
Enables unit to reach preset
temperature in shortest possible
time.
O
06
SHORTCUT
Used to restore the current
settings or resume previous
settings.
LED