Lock Function; Boost Function - Midea Rg10A3B/Bgef Bedienungsanleitung

Silence function
2s
FP function
Press this button 2 times during one second under HEAT Mode and setting temperature of
17 C/62 F or 20 C/(for models of RG10A10(B)/BGEF and RG10A11(B)/BGEF).
O
O
O
2
Note: This function is for heat pump air conditioner only.
Press this button 2 times during one second under HEAT Mode and setting temperature of
17 C/62 F or 20 C(for models of RG10A10(B)/BGEF and RG10A11(B)/BGEF) to activate
FP function.Press On/Off, Sleep, Mode, Fan and Temp. button while operating will cancel
this function.

LOCK function

5s
+
Clean

Boost Function

Press Boost button
Boost
Keep pressing Fan button for more than 2 seconds to activate/disable Silence
function(some units).
Due to low frequency operation of compressor, it may result in insufficient cooling
and heating capacity. Press ON/OFF, Mode, Sleep, Turbo or Clean button while
operating will cancel silence function.
The unit will operate at high fan speed (while
compressor on) with temperature automatically
set to 8 C/46 F.
5s
Press together Clean button and Boost button at the
Boost
same time more than 5 seconds to activate Lock function.
All buttons will not response except pressing these two
buttons for two seconds again to disable locking.
When you select Boost feature in COOL mode, the unit will blow cool air
with strongest wind setting to jump-start the cooling process.
When you select Boost feature in HEAT mode, for units with Electric heat
elements, the Electric HEATER will activate and jump-start the heating
process.
13