Buttons And Functions - Midea Rg10A3B/Bgef Bedienungsanleitung

Buttons and Functions

Before you begin using your new air conditioner, make sure to familiarize yourself with its remote
control. The following is a brief introduction to the remote control itself. For instructions on how to
operate your air conditioner, refer to the How to Use Basic Functions
ON/OFF
Turns the unit on or off.
TEMP
Increases temperature
in 1 C(1 F) increments. O O
Max. temperatur e is
30 C(86 F).
O O
SET
Scrolls through operation
functions as follows:
Fresh( ) 
Sleep(
Follow Me( )

AP mode( )
 Fresh...
The selected symbol will
flash on the display area,
press the OK button to
confirm.
OK
Used to confirm the
selected functions.
TEMP
Decreases temperature
in 1 C(1 F) increments. O O
Min. temperature is
17 C(62 F). O O
FAN SPEED
Selects fan speeds in the
following order:
AUTO LOW MED


NOTE: Holding this button
down for 2 seconds will
activate Silence feature.
SWING
Starts and stops the horizontal
louver movement. Hold down
for 2 seconds to initiate vertical
louver auto swing feature
(some units).
NOTE: For models of RG10A3(B1)/BGEFU1 and RG10A3(B1)/BGCEFU1, press together
buttons at the same time for 3 seconds will alternate the temperature display between the
°C & °F scale. Fresh feature is only available for models of RG10A2(B)/BGCEF
and RG10A10(B)/BGEF.
)

Boost
HIGH

RG10A3(B)/BGEF, RG10A3(B1)/BGEFU1,
Model:
RG10A2(B)/BGCEF and RG10A3(B1)/BGCEFU1(Cooling only models,
AUTO mode and HEAT mode are not available),
RG10A10(B)/BGEF(20-28 C).
MODE
Scrolls through operation modes
as follows: AUTO  COOL 
DRY  HEAT  FAN
ECO/GEAR
Press this button to enter the
energy efficient mode in a
sequence of following:
ECO
GEAR(50%)
mode
TIMER
Set timer to turn unit on or off
SHORTCUT
Used to restore the current
settings or resume previous
settings.
CLEAN
Used to start/stop the Clean
function.
O
04
section of this manual.
GEAR(75%)
Previous setting
ECO ......
LED
Turns indoor unit's LED display
and air conditioner buzzer on and
off (modeldependent), which
create a comfortable and quiet
environment.
Boost
Enables unit to reach preset
temperature in shortest possible
time.
&