Installation Procedures; Cleaning & Maintenance - Wellis Cosmo ACS0206 Aufbauanleitung

| EN |

Installation Procedures

Please install the connection hose into the wall according to the installation Procedures.
Water
heater connection
connection
Usage
How to operate the handle
– Raise the handle up for opening water; push it
down for close!
– Turn the handle to the left to increase hot water
flow for higher water temperature, and lower
water temperature by operating reversely!
Cleaning & Maintenance
To keep the product clean & shining, follow the as below:
1. Flush with clean water & dry with soft cloth only!
2. If any dirt, clean with soft liquid or transparent glass detergent!
3. Do not use any scrubbing detergent, polisher, sane-cloth, paper tissue or scraper!
4. Do not use acid detergent, indissovable grain-like detergent or soap!
The operation of our shower panels and faucets is designed for the ideal water pressure
between 3.5-4.5 bar.
Cold
hose
Hot
hose
Sealed
tape
Close
Open
Left
hot
water
| 3 |
Right
cold
water