Supra PTC606E TINO CERAM Gebrauchsanleitung Seite 9

finish all setting with display of
HEATER FUNCTION
Select the desired heating power (V)
H0 = fan mode
H1 = 1000W
H2 = 2000W
TIMER FUNCTION
The appliance's operating time can be
controlled.
To program the operating time simply select it
using the (7) or (III) buttons.
Press (II) or (VI) / (9) or (10) to set the timer
from 0-9 hours.
OPEN WINDOW FUNCTION
Press the button (8)+(9) to activate the window
sensor function.
The screen will display
the screen will display the set temperature.
To turn off open window function, press
together (8) + (10), the screen will display
, after 3 seconds, the screen will display
the set temperature.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE
Turn the appliance off, using the on/off switch.
Turn the appliance off using the on/off button.
Unplug the appliance from the mains.
Clean the appliance.
CARRY HANDLE/S
This appliance has a handle on the back to
make it easy and convenient to transport.
ANTI-TIPPING SAFETY DEVICE
The appliance has an anti-tipping safety device
that turns it off if the working position is not the
correct one.
SAFETY THERMAL PROTECTOR
The appliance has a safety device, which
protects the appliance from overheating.
When the appliance switches itself on and
off repeatedly, for reasons other than the
thermostat control, check to ensure that there
are no obstacles that impede correct air entry
or expulsion.
If the appliance turns itself off and does not
switch itself on again, disconnect it from the
3-EN.indd 3 3-EN.indd 3
mains supply, and wait for approximately 15
.
minutes before reconnecting. If the machine
does not start again seek authorised technical
assistance.
CLEANING
Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
Do not use solvents, or products with an
acid or base pH such as bleach, or abrasive
products, for cleaning the appliance.
Do not let water or any other liquid get into the
air vents to avoid damage to the inner parts of
the appliance.
Never submerge the appliance in water or any
other liquid or place it under running water.
If the appliance is not in good condition of
cleanliness, its surface may degrade and
, after 3 seconds,
inexorably affect the duration of the appliance's
useful life and could become unsafe to use.
Remark: When the appliance is used as a
heater after long periods in storage or after
having been used solely as a fan a small
amount of smoke may be produced. This is
not important and is due to the heater burning
dust deposits which have accumulated on the
heating element. This phenomenon may be
avoided by cleaning the inside of the appliance
beforehand through the grill with a vacuum
cleaner or pressurised air.
31/3/22 18:17 31/3/22 18:17