Installation
Installation
- Removing the speakers -
1
Remove the hexagonal head bolt from the speaker arm.
Tip
Keep the hexagonal head bolt for future use.
2
Spread a soft cloth over the floor in order to prevent
damaging the surface of the speaker.
Caution
Do not touch the cone material while carrying out
adjustments or the driver could be damaged.
3
Place the speaker on its side.
4
Remove the speaker angle adjustment nut from the
speaker arm.
Tip
Retain the angle adjustment nut as it will be required to
secure the speaker in position.
Rear view of the speaker
Hexagonal head
bolt
Speaker arm
Speaker angle adjustment nut
− 9 −
Hexagonal head bolt
Speaker angle adjustment nut
Allen key (small)
(included with speaker)
Speaker
Speaker arm
Allen key (large)
(included with speaker)