Connecting The Speaker Cable; Adjusting The Speaker Angle - Eclipse 508DMK3 Bedienungsanleitung

- Connecting the speaker cable -

1
Insert the bare ends of the speaker cable into the holes
in the speaker input terminals and secure them in place.
Caution
When connecting the speaker wires, insert the bare
ends of the speaker wires correctly so that they do not
touch neighboring terminals, otherwise it may cause
short-circuits.

- Adjusting the speaker angle -

1
Loosen the speaker angle adjustment nut.
2
Adjust the speaker to the desired angle.
Caution
Be careful not to let the speaker stand fall over while
adjusting the angle.
Tip
The angle of the speaker can be adjusted within the
range of +15° to -10°.
3
Tighten the speaker angle adjustment nut.
Caution
Securely tighten the speaker angle adjustment nut.
Speaker input terminals
Speaker cable
＋15°
－10°
− 12 −
⊖
⊕
Speaker cable
Speaker
Speaker angle
adjustment nut
Allen key (large)
(included with speaker)