Explanation Of Symbols; Symbols In Manual; General Warnings; General Safety Warnings - TJEP KYOCERA C-RINGER Bersetzung Der Original Bedienungsanleitung

Explanation of symbols

Symbols in manual

Read and understand tool labels and
manual. Failure to follow warnings
could result in serious injury.
Operators and others in work area shall
wear impact-resistant eye
protection with side shields.
Operators and others in work area shall
wear hearing protection.
It is recommended that operator and
others in work area wear CE-marked
helmet at the job site.
Read all safety warnings and all instruc-
!
tions before use.
Keep clear of the jaws during use and
inspection of the tool.
!

General warnings

General safety warnings

• WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric shock, fire,
serious injury and/or death.
• Use the tool and accessories in accordance with
these instructions, taking into account the working
conditions and the work to be performed. Use of
the tool for operations different from those intended
could result in a hazardous situation.
• Stay alert, watch what you are doing and use
common sense when operating the tool. Do not use
the tool while you are tired or under the influence of
drugs, alcohol or medication. A moment of inatten-
tion while operating the tool may result in serious
personal injury.
• The risks to others shall be assessed by the oper-
ator.
• Use CE-marked eye protection with front and
side protection against flying objects when
handling, operating, and servicing the tool.
• Use CE-marked ear protection near or at the
job site to prevent hearing damage. Unpro-
tected exposure to high noise levels can cause
permanent, disabling, hearing loss and other prob-
lems such as tinnitus (ringing, buzzing, whistling or
humming in the ears). Appropriate controls to re-
duce the risk may include actions such as damping
materials to prevent workpieces from "ringing".
• It is recommended to wear CE-marked head
protection at the job site.
• It is employer's responsibility to enforce tool users
Symbols on tool
This tool is CE-approved according to
applicable standards.
Read and understand tool labels and
manual. Failure to follow warnings
could result in serious injury.
Disposal of tool and batteries according
to the WEEE directive.
Read all safety warnings and all instruc-
!
tions before use.
Keep clear of the jaws during use and
inspection of the tool.
and all other nearby personnel at the job site to
wear personal protective equipment such as eye
protection, dust mask, non-skid safety shoes, hard
hat and/or hearing protection.
• Dress properly. Do not wear loose clothing or jewel-
lery. Keep your hair, clothing and gloves away from
moving parts to avoid serious injuries. Only wear
gloves that provide adequate feel and safe control
of trigger and any adjusting devices. Wear warm
clothing when working in cold conditions, to keep
your hands warm and dry.
• Do not overreach. Keep proper footing and balance
at all times. This enables better control of the tool in
unexpected situations.
• When working at high places, make sure that no-
body is under the working area. If the tool or other
materials accidently are dropped it may lead to
injuries or fatalities.
• Prevent unintentional starting. Do not carry the
tool with your finger on the trigger and set the main
switch in OFF position when carrying the tool.
• Respect the tool as a working implement.
• Do not engage in horseplay.
• Remove any adjusting keys or wrenches before
using the tool. A wrench or a key left attached to a
moving part of the tool may result in personal injury.
• The tool is not designed to be used in explosive
atmosphere such as in the presence of flammable
liquids, gases or dust. Do not use the tool in this
kind of environment.
• Handle the tool with care, as it can get hot, affecting
grip and control.
• Keep work area clean and well lit. Cluttered or dark
areas invite to accidents.
English
5