Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Bracket installation when wiring is inside the wall:
1. Open the package and take
out the accessories for
installation.
4. Remove the holding-ring.
7. Connect the desired power
supply (12-24 V AC/DC or
85-265 V AC).
2. Drill 2 holes with a 6 mm diameter
and 35 mm deep according to the
spacing of the lamp bracket holes.
(Use screw anchors when needed)
5. Remove the lamp cover.
8. Replace the lamp cover and reattach
it to the base with the Φ2.3*8 mm
screws.
8
3. Fix the bracket on the wall with the
Φ3,8*30 mm screws.
6. Attach the lamp to the bracket.
9. Replace the holding ring. The
installation is now complete!
Werbung
