Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3. Use a sharp object to
carefully pierce the screw holes.
6. Align the lamp-holder with the
fixed space and tighten it with the
Φ4*25 screw in the accessories.
9. Replace the holding-ring
and to finish the installation.
Schartec hereby declares that the signal light F5000 and F5015 is compliant with all relevant CE directives. The full text
of the EU Declaration of Conformity is available at the following Internet address: www.schartec.de/en
4. Remove the holding-ring and lamp
cover.
7. Replace the lamp cover.
Simplified EU Declaration of Conformity (CE)
6
5. Connect the desired power supply
(12-24 V AC/DC or 85-265 V AC).
8. Align the fixing holes of the
lampshade and the base, and
fasten the screws (Φ2.3*8).
Werbung
