Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SCHARTEC
a trademark of bau-shop-24 GmbH
Fritz-Müller-Strasse 119
73730 Esslingen
Germany
WEEE Reg. Nr.: DE90317979
BattG Reg. Nr.: 21008776
Connecting Instruction
• Connect the wire with J1 if power supply is 85-265VAC
• Connect the wire with J2 if power supply is 12-24VAC/DC
• J3 is for connecting the antenna to extend the effective distance of controller
o Note：1. Connect
Instructions
•
•
Installation
1. Open the package and take
out the accessories for installation.
Schartec Profi-Flashing lamp user manual
Safety Instructions
For your safety, please read the users manual carefully before initial operation; Please
be sure the power is off before connecting. The product is produced without fuse;
This system must not endanger life or property during the running failure or its
security risks have been eliminated.
Technical Specification
• Working voltage：85-265 V AC or 12-24 V AC/DC
• Loading capacity：<5W
• Flicker Frequency：4Hz
• Working temperature：-20º to +60℃
• IP Level: IP54
• Size φ90* 125mm
• Weight: 150g
• Article Number: ST201004, ST201005, ST201006, ST201007
J1 or J2,
LED will
2．Stick the paper on the proper place, and then drill the hole.
connect both
2. J3 should be connected with shielding line
5
Werbung
