Inhaltsverzeichnis
Werbung
BM 116
Anhang A
Measurement Category IV (CAT IV) is for measurements performed at the source of the low-voltage instal-
lation. Examples are electricity meters and measurements on primary overcurrent protection devices and
ripple control units.
Measurement Category III (CAT III) is for measurements performed in the building installation. Examples
are measurements on distribution boards, circuit-breakers, wiring, including cables, bus-bars, junction boxes,
switches, socket-outlets in the fixed installation, and equipment for industrial use and some other equipment,
for example, stationary motors with permanent connection to the fixed installation.
Measurement Category II (CAT II) is for measurements performed on circuits directly connected to the low
voltage installation. Examples are measurements on household appliances, portable tools and similar
equipment.
Anhang B
General Specifications:
Display :
Update Rate :
Polarity :
Low Battery :
Operating Temperature :
Relative Humidity :
Altitude :
Storage Temperature :
Temperature Coefficient :
Sensing :
Safety :
Transient protection :
Pollution degree :
E.M.C. :
Overload Protections :
Power Supply :
Power Consumption :
APO Timing :
APO Consumption :
Dimension :
Weight :
Jaw opening &
Conductor diameter :
Accessories :
14
3-3/4 digits 4000 counts LCD display(s)
3 per second nominal
Automatic
Below approx. 2.4V
0°C to 40°C
Maximum relative humidity 80% for temperature up to 31°C decreasing
linearly to 50% relative humidity at 40°C
Operating below 2000m
O
O
-20
C to 60
C, < 80% R.H. (with battery removed)
nominal 0.15 x (specified accuracy)/
otherwise specified
Average sensing for BM115; True RMS for BM116
Meets IEC61010-2-032(1994), EN61010-2-032(1995), UL3111-2-
032(1999).
Category III 600 Volts ac & dc.
6.5kV (1.2/50µs surge) for all models
2
Meets EN61326(1997, 1998/A1), EN61000-4-2(1995), and EN61000-4-
3(1996)
In an RF field of 3V/m:
Total Accuracy = Specified Accuracy + 45 digits
Performance above 3V/m is not specified
ACA Clamp-on jaws : AC 1000A rms continuous
+ & COM terminals (all functions) : 600VDC/VAC rms
standard 1.5V AAA Size (NEDA 24A or IEC LR03) battery X 2
2.2 mA typical
Idle for 30 minutes
40µA typical on all model functions except that 190µA typical on BM116
voltage & current functions
L224mm X W78mm X H40mm
220 gm approx
45mm max
Test leads (pair), batteries installed, user's manual, & soft carrying pouch
O
O
O
C @(0
C -18
C or 28
O
O
C -40
C), or
Werbung
Inhaltsverzeichnis
