Getting Started - EBECO Wall Flex 500 Handbuch

This is Wallflex 500
Wallflex 500 is a thermostat that is equipped with a 1.8" TFT colour display and capacitive touch surfaces for easy and clear nav-
igation. It has several energy saving programs with individually adjustable times and temperatures. The adaptive function means
that the thermostat collects data from the time it is started and uses this to calculate when to switch on. A PI controller keeps
temperature fluctuations to a minimum, which gives an even heat.
It includes a ventilation function that switches off the heat for 15 minutes if it detects that the temperature drops by more than
three degrees in less than one minute.
Wallflex 500 is WiFi-ready. By purchasing the EB-Connect WiFi accessory, you can easily control the
heat with our app Ebeco Connect or via the open API. The WiFi module is available at your nearest
retailer. The app can be downloaded from Google Play and the App Store.

Getting started

Wallflex 500 has a built-in start-up guide that takes you through each step in a simple way. When commissioning the convec-
tor for the first time, the system will guide you through the most common and important settings that are required.
The thermostat touch surfaces
5
06:45 Program
19
Just nu
4
3
The thermostat menus
The thermostat's menus and features are listed below, along with explanations.
Main menu: Programme
Not selected If no program is
selected, the ther-
mostat provides
constant heat.
Week Preset times and
temperatures. Indi-
vidually adjustable.
Active
Standby
(can be deactivat-
Timer
ed)
Operating time
Resetting Software reset
1
23
Om 0:15
2
Preset to 22° C.
Adjustable 5–35°C.
Mon-Fri
Wake up 06:00, 22°C
Leave 08:00, 17° C
Return 15:00, 22° C
Sleep 23:00, 17°C.
Sat – Sun
Wake up 07:00, 22°C
Sleep 23:00, 17°C
Preset to 22° C.
Adjustable 5–35°C
Preset to 17°C
Adjustable (Off)
5–35°C
Preset to 4 h
Adjustable 0–99 h
The thermostat has a number of touch surfaces on the front of the ther-
mostat. These surfaces are marked and are outside the screen itself.
1. On/off/to home screen
2. Scroll up/to the right
3. Menu/confirm
4. Scroll down/to the left
5. Back a step
Main menu: Energy consumption
Week
Time & kWh
Month
Time & kWh
Year
Time & kWh
Operation
(14 days)
Shows the week, kWh and
number of hours.
Shows the month, kWh
and number of hours.
Shows the year, kWh and
number of hours.
Displayed as
The bars indicate the op-
erating period per day.
a bar
graph.
EB-Connect WiFi