Avision Network Box MB01W Schnelleinrichtungsanleitung Seite 9

Scan from A Wireless Computer in Internet (Client) Mode
Connect Network Box to an AP (Access Point) via Network Box's web
page
1. On your wireless computer, click the [Wi-Fi Network] icon in the taskbar and select the
network ID -MB-xxxx (xxxx is where the last four digits of the Mac address on the label of
the Network Box). (Note by default no network password is required.)
Alternatively, on your mobile devices, you may tap [Settings]>[Wi-Fi] and select the
network ID -MB-xxxx (xxxx is where the last four digits of the Mac address on the label of
the Network Box).
2. Open your Internet Browser and make sure the Proxy server has been deselected since
the Network Box does not support the proxy setting.
3. Type 10.10.10.254 on the address bar. The embedded web page will be displayed. (A
login dialog box will be first displayed. Type the default user name and password –
[admin] to enter Network Box's embedded web page. You can change the password later
in the [Network] page on Network Box's web page.)
4. Choose [WIFI] and then your desired [Network Name] (SSID). Wait for 60 seconds for the
connected status confirmation.
5. After the Wi-Fi connection is successful, choose [STATUS] to check if the selected
[Network Name] (SSID) has been connected.
9