Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Connecting the Power
1. Plug the AC power cord into the power port on the back of the switch.
2. Connect the other end of the power cord to an AC power source.
WARNING:
Do not install power cable while the power is on.
Connecting the RJ45 Ports
1. Connect an Ethernet cable to the RJ45 port of IP cameras, IP telephone, Access Points (AP), or
othernetwork devices.
2. Connect the other end of the Ethernet cable to the RJ45 port of the switch.
13
Werbung
Inhaltsverzeichnis
