Basic Functionality; Power On/Off; Select How To Control Your Floor Heating System - Veria Control T45 Installationsanleitung

EN

POWER ON/OFF

To turn thermostat on or off press "

SELECT HOW TO CONTROL YOUR FLOOR HEATING SYSTEM

Your Veria floor heating system can be controlled either by the:
• Floor temperature - program mode 2
The heating element turns on/off around a floor temperature
setpoint (the temperature shown in the display is the actual
floor temperature)
• Room temperature - program modes 1 & 4
The heating element turns on/off around a room temperature
setpoint (the temperature shown in the display is the actual
room temperature)
• Combined floor and room temperature - program modes
3 & 5
The heating element turns on/off around a room tempera-
ture setpoint with a requested max. floor temperature (floor
temperature is prioritized over room temperature)
Change between the above floor heating modes:
With the thermostat turned off.
Press "
Select mode 1 to 5 (see table on next page)
After choosing the desired mode do not press any further buttons and
the thermostat will go back to normal standby mode.
6
" and " " for 6 seconds

Basic functionality

"