Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Instructions - ROWENTA First Class DA1510 Gebrauchsanweisung

Vorschau ausblenden Andere Handbücher für First Class DA1510:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 5

SAFETY INSTRUCTIONS

• Please read these instructions carefully and keep
them for further references.
• Never leave the appliance unattended when it is
connected to a power source; if it has not cooled
down for approximately 1 hour.
• The iron must be used and rested on a flat, stable,
heatresistant surface.
• When you place the iron on the iron rest, make sure
that the surface on which you place it is stable.
• Always unplug your appliance: before filling, or
rinsing the water tank, before cleaning it, after each
use.
• Children must be supervised to ensure that they do
not play with the appliance.
• Keep the iron and its cord out of reach of children
less than 8 years of age when it is energized or
cooling down.
• This appliance can be used by children aged from
8 years and above and persons with reduced
physical, sensory or mental capabilities, or lack
of experience and knowledge, if they have been
given supervision or instruction concerning use
of the appliance in a save way and understand the
hazards involved.
• Cleaning and user maintenance shall not be made
by children without supervision.
• The appliance must not be used if it has fallen to
the floor, shows evident of damage, leaks or fails to
function correctly. Never dismantle you appliance.
To avoid any danger, have it inspected in an
approved service centre.
The surfaces which are marked with this sign
and the soleplate are very hot during the use
of the appliances. Don't touch these surfaces
before the iron is cooled down.
• If the electric power cord is damaged, it must be
replaced by an Approved Service Centre in order
to prevent any danger.
• This iron is not intended for regular use.
• BEFORE IRONING, ADJUST THE IRON TO CORRECT
VOLTAGE FOR YOUR LOCATION, USING A SHARP
OBJECT. IF THE VOLTAGE SELECTED IS 120 V, THE
IRON WILL OPERATE AT 110 - 127 V. IF IT IS SET
AT 240 V, THE IRON WILL OPERATE AT 220 - 240 V.
1
EN

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

First class da1511First class da1510f1

Inhaltsverzeichnis