Veripart VPKK170W Benutzerinformation Seite 45

4. Lay the back of the refrigerator on a soft surface.
First remove the two adjusting feet. Then loosen
the screws on the door hinge and the adjusting
bolt on the bottom left.
Note: If there is a screw on the bottom left-hand corner,
remove it before installing the hinge.
5. Unscrew the hinge pin on the bracket, turn the bracket around and reinstall
the hinge pin here.
6. Install the hinge on the left side and the
adjustment bolt on the right side. Screw the
two adjusting pins back on with the
corresponding parts.
7. Unscrew the hinge pin from the top hinge and
screw it into the opening on the left-hand side.
45