TechniSat TECHNIBOX UHD S Bedienungsanleitung Seite 100

> Use the right/left arrow buttons to highlight Yes or No and confirm using
the OK button. Depending on your selection, the changes will now be saved or
rejected and you return to the next menu level up.
Alternatively:
> Press the Menu or TV/RADIO button to leave the menu directly. Settings that
need to be saved manually will be reset in this case.
If the green function button with Accept is not displayed on the bottom line of
the screen, the changes are saved automatically on exiting the menu.
By pressing the TV/RADIO button, you always return to normal TV mode
without saving if you are in a menu.
9.4 Changing a setting
You can create settings using the arrow selection method, the selection list, by
entering numbers and by using the virtual keyboard. The device specifies
the method that can be used to change a highlighted
setting. This is evident from the following displayed symbols:
-
-
-
-
9.4.1 Arrow selection
> If is shown on the left and
this using the left/right arrow buttons.
100
Arrow selection method (Section 9.4.1)
Arrows are shown on the left or right edge of the highlight.
Selection list (Section 9.4.2)
Symbol is shown on the right edge of the highlight.
Entering numbers (Section 9.4.3)
Virtual keyboard (Section 9.4.4)
Symbol is shown on the right edge of the highlight.
on the right next to the set value, you can alter