Parts List; Operation - Lacor 69278 Gebrauchs- Und Instandhaltungsanleitung

8
1- Open the top and pour water into the Water Container.
NOTE: Do not fill past the maximum water level.
2- Pour water to the level that corresponds to the amount of cups of coffee you would like to
make.
3- Place the Coffee Container correctly and put in the provided coffee filter.
4- Add coffee into the filter and close the top.
5- Place the Pitcher so that the bottom of the Coffee Container directly touches the top of the
Glass Pitcher.
6- Connect the power cable to a 220-240V/50Hz outlet.
7- Press the ON/OFF switch in order to turn on the drip coffee maker. A red light will turn on.
8- After one minute, the coffee will start to drip into the Glass Pitcher.
NOTE: The Coffee Maker is designed to be able to serve coffee while it is being made. The
Coffee Container has an anti-drip system, which will only dispense when the Glass Pitcher is
placed correctly. Do not have the Glass Pitcher out of place for more than 30 seconds, or the
liquid may overflow out of the Coffee Container.
9- Once the cycle is finished, remove the Glass Pitcher to serve the coffee, or leave it on top of
the Heating Plate to keep it hot.
NOTE: In order to keep the coffee hot, the ON/OFF switch must stay switched on. After 40
minutes, the Drip Coffee Maker will automatically switch off.
10- If you are no longer going to use the Coffee Maker, press the ON/OFF button in order to
switch it off.

PARTS LIST

1
1- Top
2- Spray
3- Coffee Container
2
4- Water Container
3
5- Water Level
6- Body
7- ON/OFF Switch
4
8- Base
9- Heating Plate
10- Glass Pitcher
5
6
7
7

OPERATION

21