Special Conditions For Safe Use - Cooper MEDC SM87BG Exi Technische Anleitung

5.0 CERTIFICATION/APPROVALS
IECEx units
Certified to IEC 60079-0, IEC 60079-11 and IEC 60079-26
Ex ia unit (IEC certification No. IECEx BAS10.0033X)
Ex ia IIC T4 Ga (-55°C to +55°C)
The IECEx certificate and product label carry the IECEx equipment protection level marking
Ga
Where Ga signifies suitability for use in a Zone 0 surface industries area in the presence of gas.
ATEX units
Certified to EN60079-0, EN60079-11 and EN60079-26
Ex ia unit (ATEX certification No. Baseefa02ATEX0152X)
Ex ia IIC T4 Ga (-55°C to +55°C)
The ATEX certificate and product label carry the ATEX group and category marking:
II 1 G
Where:
Signifies compliance with ATEX
II Signifies suitability for use in surface industries
1 Signifies suitability for use in a zone 0 area
G Signifies suitability for use in the presence of gases
The ATEX certificate and product label also carry the following mark:
1180
This signifies unit compliance to the relevant European directives, in this case 94/9/EC, along with the number of the notified
body issuing the EC type examination certificate.

6.0 SPECIAL CONDITIONS FOR SAFE USE

The apparatus enclosure is made from metal alloy which must be protected against impact to avoid a possible risk of ignition
due to impact
© Cooper MEDC 2010 11/10