YABER Pro U9 Bedienungsanleitung Seite 20

Image setting
Picture Mode
Brightness
Contrast
Saturation
Sharpness
Color Temperature
NR
Over scan
6.1 4-corner Keystone：0~50
When the projection screen is not rectangular, it can be adjusted by 4-point
keystone correction.
Step 1: Press the button to select the [4-corner Keystone] menu, then
press the [ OK ] bottom to enter the submenu.
Step 2: Keep pressing the OK button on the remote control or projector to
select the point.
Step 3: Press the arrow keys on the remote or projector to adjust the
horizontal or vertical parameters, until the projection screen becomes the
desired rectangle.
Include
Standard, Warm, User, Cool
0~100
0~100
0~100
0~100
Standard, Warm, User, Cool
Medium, High， Low， OFF
ON,OFF
Keystone Setting
4-corner keystone
4-style keystone
Reset
aftersales@yabertech.com Support@yabertech.com
Switch among the image mode
Adjust the brightness parameter to 100
Adjust the contrast parameter 0-100
Adjust saturation parameters 0-100
Adjust sharpness parameters 0-100
Adjust color temperature
Noise setting
Over scan
17
EN
Function