Installation For Operation With Tripod / Mast Systems; Fault; Cleaning And Care - Seto ALDEBARAN RAPTOR RP LED Gebrauchsanleitung

3. Installation for operation with tripod / mast systems

Connect the LED spotlight to the tripod / mast using the bolt
holder. Lock the ALDEBARAN® RAPTOR (PRO) RP LED with
the star grip (H). Before extending the mast, the connecting
cable must be completely unwound.
Cable winding (only ALDEBARAN® RAPTOR PRO RP LED)
The integrated cable winding on the back allows the connection
cable can be wound up. This ensures optimum flexibility
for mobile use in terms of transport and transport and packaging.

Fault

LED spotlight
without function
Failure – one module out of several
DANGER! Electric current!
Before any maintenance, repairs or cleaning, the device must always be disconnected from the power supply by
pulling out the mains plug.
Do not use any solvents, alcohol or other chemicals to clean the plastic parts / metal parts.
To remove dirt, dust, oil and grease, etc., use a soft, dry, lint-free cloth.
Fault
Possible cause
Disconnection from the supply
network
Defective LED module

Cleaning and care

Solution
Check the connection to the power
supply
Repair required
15