Alde 3010 413 Gebrauchsanleitung Seite 17

Assembly instructions for control panel 3010 413
The control panel is intended for the Alde Compact 3010 central heating boiler.
Assembly
The control panel should be located at least 1 metre above the floor, but not too close to the ceiling. Nor should it
be located on an outer wall or close to objects which radiate heat, for example, CD players, refrigerator and lamps,
as this can give incorrect temperature. The area behind the panel should be well ventilated. If the room tempera-
ture on the panel is affected nevertheless, an external sensor should be connected to the panel.
Make a hole for the panel as shown in figure A. Screw down the panel and push the front part on.
Clip on the cables to avoid wear on the terminal strip of the panel.
87 mm 40 mm
6,5 mm
MENU MENU MENU
A.
75,5 mm
73 mm
R 5
17