AFRISO FTM Betriebsanleitung Seite 28

5.3.2 Mounting the bracket holder
If required, you can use the enclosed holder.
Verify that the product has been connected to the AFRISOhome gate-
way before plugging it onto the holder.
5.4 Inserting a battery (optional)
In the case of daylight with an illuminance of less than 200 lux, use an
optional battery (see "Technical data", not included).
1. Remove the product from the holder.
2. Lift the cover using a screwdriver and remove the cover.
- Make sure not to damage the seal.
3. Fit the battery.
- Verify correct polarity.
4. Refit the cover.
5. Plug the product onto the holder until it snaps in.
Mounting
1. Mount the holder to a wall or to a
pipe. Fixate the holder using the
enclosed adhesive dots.
2. Plug the product onto the holder
until it snaps in.
EN
12
FTM