Mounting The Product; Connecting The Probe - Afriso Ftm Betriebsanleitung

2. Press the LRN pushbutton of the product with an object that is not pointed and
not conductive.
- The product sends an learn telegram (LRNTEL) to the AFRISOhome gateway.
- The product is now connected to the AFRISOhome gateway.
3. Refit the cover.
5.3

Mounting the product

Choose an installation site without direct exposure to sunlight.
- Direct sunlight causes incorrect temperature values.
5.3.1

Connecting the probe

1. Connect the probe to the product (see chapter "Application exam-
ple(s)").
Mounting
1. Lift the cover using a screwdriver
and remove the cover.
- Make sure not to damage the
If the product is used in darker
environments:
Install a battery (see "Inserting a bat-
tery (optional)").
seal.
EN
11
FTM