Foscam SD2X Benutzerhandbuch Seite 7

Tap + icon Select "Scan the Code" Scan the QR code which is
located at the bottom of
your camera.
7. There are two options in the following steps, please pay attention to choose the
corresponding adding method.
a. Please wait for a few seconds, you can tap "Configure Wi-Fi" in "Configure
Wi-Fi" interface, then select your Wi-Fi network and enter your Wi-Fi's
password. After, you can set the camera name and tap "Save" in "Set
name" interface
Configure Wi-Fe Select your Wi-Fi Network Camera added successfully
and enter you Wi-Fi's and name has been set
password
Note: It is strongly recommended that you choose to configure Wi-Fi at this step.
7