Foscam SD2X Benutzerhandbuch Seite 6

2. Connect the camera to your router with an Ethernet cable.
3. Plug the power adapter into the camera, and then wait for about 1 minute.
4. Make sure your smart phone is connected to the same Wi-Fi network as the
camera
Tips: The camera supports dual-band 2,4Ghz and 5Ghz Wi-Fi networks, so you can
choose the channel with the stronger signal to use. For example, choose your
SSID: XXXXX_2.4G or XXXXX_5G.
5. Open the foscam APP and please register a Foscam account, or sign in if you have
one already.
6. After logging into Foscam APP, select "Tap to add a camera" or "+" icon on the
upper right corner, then select "Scan the QR code" and scan the QR code that
labelled at the bottom of your camera.
6