Technical Data - DeWalt D28710 Originalanweisungen

E N G L I S H
CHOPSAW D28710
Congratulations!
You have chosen a D WALT tool. Years of
E
experience, thorough product development and
innovation make D WALT one of the most reliable
E
partners for professional power tool users.

Technical Data

Voltage V
U.K. & Ireland V
Type
Power input W
-1
No-load speed min
Min. peripheral speed
cutting disc m/s
Disc diameter mm
Disc bore mm
Disc body thickness mm
Type of cutting disc
Cross-cutting capacity at 90°
circular mm
square mm
rectangular mm
angular mm
Cross-cutting capacity at 45°
circular mm
square mm
rectangular mm
angular mm
Weight kg
L (sound pressure) dB(A)
PA
K (sound pressure
PA
uncertainty) dB(A)
L (sound power) dB(A)
WA
K (sound power
WA
uncertainty) dB(A)
26
Vibration total values (triax vector sum) determined according to
EN 61029:
Vibration emission value a
The vibration emission level given in this information
sheet has been measured in accordance with a
D28710
standardised test given in EN 61029 and may be
used to compare one tool with another. It may be
230
used for a preliminary assessment of exposure.
115
1
2200
3800
80
355
25.4
3.1
straight,
non-recessed
130
120 x 120
115 x 130
137 x 137
115
107 x 107
115 x 107
Fuses
115 x 115
U.K. & Ireland
17.0
Defi nitions: Safety Guidelines
D28710 D28710
The definitions below describe the level of severity for
230V 115V
each signal word. Please read the manual and pay
attention to these symbols.
92.3 92.7
3.0 3.0
105.3 105.7
3.0 3.0
h
a = m/s²
h
Uncertainty K = m/s²
WARNING: The declared vibration
emission level represents the main
applications of the tool. However if the
tool is used for different applications,
with different accessories or poorly
maintained, the vibration emission may
differ. This may significantly increase the
exposure level over the total working
period.
An estimation of the level of exposure to
vibration should also take into account
the times when the tool is switched off or
when it is running but not actually doing
the job. This may significantly reduce
the exposure level over the total working
period.
Identify additional safety measures to
protect the operator from the effects of
vibration such as: maintain the tool and
the accessories, keep the hands warm,
organisation of work patterns.
230 V tools 13 Amperes, in plugs
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not avoided,
may result in minor or moderate
injury.
3.3 1.8
1.5 1.5