English (Original Instructions); Technical Data - DeWalt D28710 Bersetzt Von Den Originalanweisungen

EngLIsh
CHOPSAW
D28710
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage
UK & Ireland
Type
Power input
No-load speed
Min. peripheral speed cutting disc
Disc diameter
Disc bore
Disc body thickness
Type of cutting disc
Cross-cutting capacity at 90°
circular
square
rectangular
angular
Cross-cutting capacity at 45°
circular
square
rectangular
angular
Weight
Noise values and vibration values (triax vector sum) according to EN61029:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound
level)
Vibration emission value a =
h
Uncertainty K =
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN61029 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure.
20
WALT one of the
e
D28710
230
V
AC
V 115
AC
1
W 2200
min -1 3800
m/s 80
mm 355
mm 25.4
mm 3.1
straight, non-recessed
mm 130
mm 120 x 120
mm 115 x 130
mm 137 x 137
mm 115
mm 107 x 107
mm 115 x 107
mm 115 x 115
kg 17.0
D28710 D28710
230V 115V
dB(A) 92.3 92.7
dB(A) 105.3 105.7
dB(A) 3.0 3.0
m/s 3.3 1.8
2
m/s 1.5 1.5
2

WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation
of work patterns.
EC-Declaration of Conformity
Machinery Directive
Chopsaw
D28710
D WALT declares that these products described under
e
Technical Data are in compliance with:
2006/42/EC, EN61029-1:2009 +A11:2010, EN61029-2-10:2010
+A11:2013.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Director Engineering
D WALT, Richard-Klinger-Straße 11,
e
D-65510, Idstein, Germany
26.03.2018
WARNING: To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WALT at
e
WALT.
e