Recommendations - Keypool Blueswim Tunable Installationsanleitung

OUTPUT 1
TUNABLE
TUNABLE
*For all lighting in the Weltico White and Tunable Color range.
**For all standard retail colour lighting or other (spa, garden, etc.)
OUTPUT 2
TUNABLE
TUNABLE
COPY OuTPuT 1
unused output
8 . Close the control unit.
smartphone via the
The outputs can be changed later, after turning the power off to the control unit. Those
changes will become active once the control unit is turned on again.
The first time it is turned on, all outputs are set to OFF by default. When the
control unit is turned on after that, the output operating modes return to the

2.2.RECOMMENDATIONS

• The installation must respect the NF C 15-100 standard.
• Blueswim Tunable
exceed 40°C and must not be near products that generate heat.
• The electrical protection class of
standard NF C 15-100. This means that
• The section of lighting power cables must be correctly selected according to the
standard NF C15-100.
NAME
COlOR*
WHITe*
ON/OFF**
NAME
COlOR*
WHITe*
ON/OFF**
Blueswim Tunable
mobile app (cf. 2.5 Pairing your smartphone and control unit).
Blueswim
settings configured before the power was turned off.
must be installed in an environment where the temperature does not
Blueswim Tunable
MICRO SWITCHES
1
ON
OFF
ON
OFF
OFF OFF
MICRO SWITCHES
1
ON
OFF
OFF ON
OFF OFF
ON ON
OFF OFF
is ready to be used and paired with your
is class III
Blueswim Tunableis not connected to the ground.
21
2 3
OFF
OFF
ON
2 3
OFF
OFF
ON
ON
OFF
according to