Programming; General Operation; Setting The Fi Lter Capacity In Litre - Aquis Claris SCOUT Installations- Und Bedienungsanleitung

5. Programming

5.1

General operation

Step Button
1.
2.
3.
4.
5.
6.
7.
After 30 seconds of inactivity, the display automatically returns to „filter status".
5.2 Setting the fi lter capacity in litre
Please follow the capacity instruction for the appropriate CLARIS filter cartridge (see CLARIS filter Guide).
Step Button
1.
2.
3.
5.3 Resetting the fi lter capacity (after replacement of fi lter cartridge)
Step Button
1.
2.
3.
After reset, a timer is started that shows a filter change after 360 days.
Press the „MENU" button once - Display „filter status"
Press the „MENU" button once - Display „flow"
Press the „MENU" button once - Display „total count"
Press the „MENU" button once - Display „set filter capacity"
Press the „MENU" button once - Display „counter reading"
- 0 appears in the display = current filter was used at a counter reading
of 287 L
Press the „MENU" button once - Display „alarm"
Press the „MENU" button once - Display „settings"
Press and hold the „MENU" button for approx. 5 sec.
- Active digit flashes
Press the „MODIFY" button
- Setting the active digit
Press the „MENU" button - to confirm the desired digit and switch to the
next digit - Active digit flashes (repeat the process to the last digit)
Menu item „filter status"
Programmed filter capacity exhausted or maximum operation time of
12 months exceeded
Press and hold the „RESET" button for approx. 5 sec.
- „reset 5s" appears on the display, the countdown counts down
The filter capacity is reset, and the last programmed value appears
10
Display
Display
Display