Usogood TC20 Bedienungsanleitung Seite 9

7. Time lapse
EN
Here to set Time lapse shooting. Press "MENU" to find "Time lapse".
Press "OK", then select "ON" to set the time interval, and set the values
of Hr, Min and Sec. For example, if the process of flowers blooming has
to be recorded, time lapse can be used. The camera automatically
takes pictures in every set time intervals.
8. Time & Date
Here to set the date format. Press "MENU" to find "Time & Date". Press
"OK", then select "ON" to select the settings.
Set time & date: Set the time and date according to current time. Press
Left/Right key to choose the number and change the value by pressing
Up/Down key. Confirm the changes with "OK" key.
Time formats: 12/24hr
Date formats: dd/mm/yyyy, yyyy/mm/dd, mm/dd/yyyy
9. Password protection
Here to set the protection password of the camera. Press MENU to find
Select "Password protection". Press "OK", and then select "ON" to set
the password of the camera. The password is a 4-digit number selected
between 0-9. If the password is lost, press MENU key and REPLAY at the
same time, and slide the operating mode selector switch from OFF to
SETUP position. The camera is unlocked.
10. Serial numbers
Here to set the serial number of the camera. Press "MENU" to find
"Serial numbers".
Press "OK", and then select "ON" to set the serial number for the
camera. The serial number is a 4-digit number selected between 0-9.
11. Playback
Take down the camera from where it's fixed. Slide the operating mode
selector switch to "SETUP" position. Press replay key and Up/Down key
to review the photos/videos.
While reviewing photos, press Up/Down key to page up/down. While
reviewing videos, press OK key to start playing, press OK one more
Settings
Set time date
Se
Time format
Ta
Date format
Tin
Ld
Tin
Ph
Back Select
MENU OK
Settings
Se
Ta
Tin 01/01/2017
Ld
12 : 10
Tin
Ph
Back
MENU
5
Select
OK
EN