3
Function
The radio chime with light flash serves as an audible and visual
signal actuator in the HomeMatic system. The signals output are
triggered based on the wireless commands received.
Wireless commands can be sent for example from buttons,
remote controls or a central control unit. It is also possible to
control actuators via taught-in sensors. When an event occurs,
the sensors transmit a command (in the same way as a button,
for example). Refer to the manual for the corresponding sensor
for more detailed information.
A
Device LED
B
Visual signal
C
Channel button
D
Audible signal
A
B
C
D
15