Wheel Replacement; Brake Adjustment - Yamaha YTF2 Benutzer-/Betriebsanleitung

Wheel nut tightening torque:
88 Nm, 8.8 m . kg (65 ft . lb)
JW7
MAINTENANCE
NOTICE
Before performing wheel or brake
maintenance, verify that the main
switch is in the "OFF" position.
Serious transaxle damage can
result.

Wheel Replacement

Y-57
To remove and install a wheel on your
utility vehicle:
1. With the wheels blocked to
prevent the utility vehicle from
moving, loosen the wheel nuts.
2. Elevate the utility vehicle with a
jack and remove the wheel nuts
and the wheel.
3. Reverse the removal steps when
installing the wheel.

Brake Adjustment

The brakes on your utility vehicle are
self-adjusting.
Before you operate the vehicle, press
down on the brake pedal several
times to make sure the brakes are
functioning properly.
Consult your Yamaha dealer before
using your utility vehicle if you
suspect brake problems. Death or
serious personal injury can result
from failing to comply with the
safety instructions in this manual.
1
2
3
4
5
6
7
8
9
10
11
7-11