Yamaha YTF2 Benutzer-/Betriebsanleitung Seite 47

MAINTENANCE
1
2
B
3
4
5
6
7
8
9
Recommended oil:
Yamalube Friction Modified Shaft
Drive Gear Oil
10
Gearcase capacity:
Yamalube Friction Modified Shaft
Drive Gear Oil/800 mL, 800 cc
11
(0.9 US qt)
7-10
Transaxle Oil
To check transaxle oil level:
1. Place the utility vehicle on a flat,
level surface.
2. Place an oil pan under the
transaxle case.
3. Clean area around servicing
plug å and vent cap ∫.
4. Remove transaxle oil servicing
plug and vent cap located on the
rear of the transaxle case.
A
5. Transaxle oil should be at the
Y-1745
top of the oil servicing hole or
just beginning to run out of hole.
Do not allow foreign material to
enter transaxle. Serious transaxle
damage can result.
6. If needed, add Yamalube
Friction Modified Shaft Drive
Gear Oil until it is at the top of
A
the plug hole or just beginning to
run out of servicing hole.
Y-1746
7. Install the transaxle servicing
plug and tighten to 14-19 Nm,
1.4-1.9 m . kg (124-168 in . lb).
8. Install the vent cap.
TIP
For transaxle oil replacement,
consult a Yamaha dealer or other
qualified mechanic.
NOTICE
JW7