Assistant - PATONA Premium Serie Handbuch

LCD 3G-SDI MONITOR 7"
- Display Scan -
If the image shows size error, use this setting to zoom in/out pictures automatically when receiving
signals.
The scan mode can be switched between [Fullscan], [Overscan], [Underscan].
- Check Field -
Use the check field modes for monitor calibration or to analyze individual color components of an
image. In [Mono] mode, all colors are disabled and only a grayscale image is shown. In [Blue],
[Green], and [Red] check field modes, only the selected color will be shown.
- DSLR -
Use the DSLR Preset option to reduce the visibility of on-screen indicators shown with popular
DSLR cameras. The available options are: 5D2, 5D3.
Note! DSLR is ONLY available under HDMI mode.

3-1-4. Assistant

- Peaking -
The peaking is used to aid the camera operator in obtaining the sharpest possible picture. Select
"On" to display colored outlines around the sharp areas of the image.
- Peaking Color -
Use this setting to change the color of focus assist lines to [Red], [Green], [Blue], [White] or [Black].
Changing the color of the lines can help make them easier to see against similar colors in displayed
image.
- Peaking Level -
Use this setting to adjust the level of focus sensitivity from [0]-[100]. If there are many details on the
image with high contrast, it will display lots of focus assist lines that may cause visual interferences.
So, decrease the value of peaking level to reduce the focus lines and to see it more clearly.
Conversely, if the image has less details with low contrast, you should increase the value of peaking
level to see the focus lines more clearly.
14