Function - PATONA Premium Serie Handbuch

LCD 3G-SDI MONITOR 7"

3-1-3. Function

Function
- Scan -
Use this menu option to choose Scan mode. There are three preset modes:
⚫ Aspect
Select the Aspect under Scan option, then use Aspect option to switch between several aspect ratio
setting. For example:
In 4:3 mode, images are scaled up or down to fill the maximum 4:3 portion of the screen.
In 16:9 mode, images are scaled to fill the entire screen.
In Full mode, images are scaled to fill the entire screen.
⚫ Pixel to Pixel
The pixel-to-pixel mode is a 1:1 pixel mapping with native fixed pixels, which avoids loss of
sharpness due to scaling artifacts and normally avoids incorrect aspect ratio due to stretching.
⚫ Zoom
The image can be enlarged by [X1.5], [X2], [X3], [X4] ratios. To select the [Zoom] under [Scan],
choose at first [Scan] than [Zoom] and then the ratios under [Zoom].
Note! Zoom option can ONLY be activated as user select [Zoom] mode under [Scan].
Scan Aspect, Pixel to Pixel, Zoom
Full, 16:9, 1.85:1, 2.35:1, 4:3, 3:2, 1.3X, 2.0X, 2.0X
Aspect
MAG
Display Scan Fullscan, Overscan, Underscan
Check Field OFF, Red, Green, Blue, Mono
Zoom X1.5, X2, X3, X4
Freeze OFF, ON
DSLR (HDMI) OFF, 5D2, 5D3
13