Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
/ ViVi
Helmet
®
FEATURES - BATTERY AND CHARGER
8
5
10
4
1
BATTERY DISPOSAL/RECYCLING
WARNING:
• ALWAYS follow the current local recommendations and/or regula-
tions governing environ-mental protection and risks associated with
recycling or disposing of the equipment at the end of its useful life.
• Per the European Union (EU) Waste Electronics and Electrical Equipment
(WEEE) Directive 2002/96/EC, product must be collected separately.
• DO NOT dispose of as unsorted municipal waste. Contact your local distrib-
utor for disposal information.
• Contains no hazardous substances, per RoHS standard.
NOTES:
• This battery pack contains lithium ionide. After the end of its useful
life, the battery must be disposed of by qualifi ed recycling or hazard-
ous materials handling operators.
Li-ion
• DO NOT dispose the battery pack between other solid wastes. For dis-
posal and recycling information, refer to local operators responsible for
recycling or handling hazardous materials.
SPECIFICATIONS (CONTINUED)
ViVi
®
The customer or the user of ViVi
EMISSIONS TEST
RF emissions CISPR 11
RF emissions
Harmonic emissions
lEG 61000-3-2
Voltage fl uctuations/fl icker emissions
lEG 61000-3-3
© THI GmbH 2018/09
7
2
9
3
GUIDANCE AND MANUFACTURER'S DECLARATION - ELECTROMAGNETIC EMISSIONS
Helmet REF 80100 and 80120 are intended for use in the electromagnetic environment specifi ed below.
®
Helmet REF 80100 or 80120 should assure that it is used in such an environment.
COMPLIANCE
Group 1
Class A
Not Applicable
Not Applicable
1
AC/DC POWER ADAPTOR - with multiple AC Heads.
2
POWER LED – A blue LED on the power adaptor indicating power ON.
3
AC HEADS – 4 diff erent power plugs for country specifi c use. Consult
the user guide of the power adaptor how to install a suitable AC head.
11
4
ADAPTOR CORD – Connect the DC connector on the adaptor cord
with the battery charger.
Fully charged
Charging
Error
5
BATTERY CHARGER – designed to charge 4 battery packs REF 60401
simultaneously. Use the charger to store battery packs between op-
erations.
6
6
CHARGING BAY – Insert the battery pack into the charging bay to
connect the battery with the charger. Ensure correct orientation of the
battery.
7
7
BATTERY PACK – a belt clip helps to secure the battery pack on the
body.
BATTERY CONNECTOR – This build in connector is used to connect the
8
battery with the power cord of all ViVi
a Surgical Helmet how to secure the power cord into the battery pack.
9
CHARGING CONTACTS – Ensure they are dry and clean when con-
necting.
10
POWER LED – A green LED on the battery charger indicating power
ON.
11
CHARGING INDICATION – Each charging bay is equipped with a
multi-color LED light indicating charging status.
Fully charged
Charging
Error
CHARGING INDICATION
NOTE:
The battery status is indicated by a multi-colour LED (Pos.11) at each charging bay.
LED (POS.11)
OFF
Solid green
Solid orange
Solid red
ELECTROMAGNETIC ENVIRONMENT - GUIDANCE
ViVi
Helmet REF 80100 and 80120 use RF energy only for its internal function.
®
Therefore, its RF emissions are very low and are not likely to cause any interfer-
ence in nearby electronic equipment.
ViVi
®
Helmet REF 80100 and 80120 are suitable for use in all establishments
other than domestic establishments and those directly connected to the public
low-voltage power supply network that supplies buildings used for domestic
purposes.
helmets. Consult the section To Don
®
STATUS INFORMATION
No battery in bay or no power.
Stand by/battery present/battery full
Battery charging
Error (see troubleshooting section)
REF 20602 | Rev-03
7
EN
Werbung
Inhaltsverzeichnis
