Sharp SJ-TE400E0W-EU Bedienungsanleitung Seite 7

CHAPTER -1: GENERAL WARNINGS
• When the product is running, high temperature can be noticed on the side panels. This situation is normal.
• In order for the product to work efficiently, there must be some gap around it for air circulation. If you are going
to place the product in a recessed area on the wall, make sure that the gap should be 100 mm between top
surface and ceiling, 50 mm between walls and side panels.
If your refrigerator has a fan condenser:
• The condenser of your fridge is placed at the bottom of
cabinet. As a result of that, assemble the spacer by fixing
it to holes on the cover bottom panel and turn 90° that's
shown below figure for arranging the distance between
the refrigera¬tor and the back wall at where you place the
fridge. You can move the fridge towards the back wall until
that point.
• Refrigerator should be placed against a wall with a free
distance not exceeding 75 mm.
100mm
50mm
EN -6-
50mm
Plastic for distance setting