Blade Maintenance; Accessories; Fault Finding - Bosch AHS 400 - 24T Bedienungsanleitung

F016 L70 366 - Buch Seite 4 Freitag, 23. September 2005 11:14 11

Blade Maintenance

Before any work on the machine itself, pull
the mains plug.
Wear gloves when handling or cleaning the cutting
blade.
Always clean the cutting blade after operation and
lubricate with protective spray. During longer cutting
jobs, we recommend periodically lubricating the cut-
ting blade with protective spray.
Visually check the condition of the cutting edges of
the cutting blade 1. Check tightness of blade bolts.
Ensure that the blade is covered with the blade
guard 7 supplied.
Cleaning/Storage
Clean the exterior of the machine thoroughly using a
soft brush and cloth. Do not use water, solvents or
polishes. Remove all debris, especially from the
ventilation slots 4.
Store the hedgecutter in a secure, dry place out of
the reach of children. Do not place other objects on
top of the machine.

Fault Finding

The following table gives checks and actions that you can perform if your machine does not operate correctly.
If these do not identify/remedy the problem, contact your service agent.
Warning: Switch off and remove plug from mains before investigating fault.
Symptom
Hedgecutter fails to
operate
Hedgecutter operates
intermittently
Motor runs but blades
remain stationary
Cutting blade hot
12 • F016 L70 366 • 05.09
Possible Cause
No power
Mains socket faulty
Extension cord damaged
Fuse faulty
Extension cord damaged
Internal wiring defective
On/Off switch(es) defective
Internal fault
Cutting blade blunt
Cutting blade has dents
Too much friction, due to lack of
lubricant
English - 4

Accessories

Blade guard AHS 400 - 24T
Blade guard AHS 480 - 24T
Blade guard AHS 550 - 24ST
Blade guard AHS 600 - 24ST
Blade guard AHS 650 - 24ST
Blade guard AHS 6000 PRO-T
Blade guard AHS 7000 PRO-T
Collecto AHS 400 - 24T
...........................
Collecto AHS 480 - 24T
...........................
Collecto AHS 550 - 24ST
........................
Collecto AHS 600 - 24ST
........................
Collecto AHS 650 - 24ST
........................
Collecto AHS 6000 PRO-T
.....................
Collecto AHS 7000 PRO-T
.....................
Lubricant spray
.............................................
Clipping sheet
...............................................
Protective goggles
......................................
Gloves
..............................................................
Remedy
Check power
Check other socket, replace
Check cord, replace
Replace fuse
Check cord, replace
Contact service agent
Contact service agent
Contact service agent
Have blade sharpened
Have blade overhauled
Apply lubricant spray
2 605 411 160
..................
2 605 411 160
..................
2 605 411 208
...............
2 605 411 208
...............
2 605 411 158
...............
2 605 411 208
............
2 605 411 158
............
2 608 005 112
2 608 005 114
2 608 005 115
2 608 005 115
2 608 005 113
2 608 005 115
2 608 005 113
1 609 200 399
F 016 800 055
2 607 990 041
2 607 000 134