Specific Absorption Rate (Sar) - ZTE Axon 30 Ultra 5G Kurzanleitung

Do not attempt to disassemble your phone.
Only use approved accessories.
For pluggable equipment, the socket-outlet
shall be installed near the equipment and shall
be easily accessible.
Don't rely on your phone as a primary device
for emergency communications.

Specific Absorption Rate (SAR)

Your mobile device is a radio transmitter and receiver. It
is designed not to exceed the limits for exposure to radio
waves recommended by international guidelines. These
guidelines were developed by the independent scientific
organization ICNIRP and include safety margins designed
to assure the protection of all persons, regardless of age
and health.
The guidelines use a unit of measurement known as Specific
Absorption Rate, or SAR. For mobile devices, the SAR limit
is 2 W/kg for the head and the body. The highest SAR value
for this device when tested at the head was 0.963 W/kg*,
and when tested at the body was 1.570 W/kg* with 5 mm
distance. The limb (0 mm) SAR limit for mobile devices is 4
W/kg. The highest SAR value for this device when tested at
the body with 0 mm distance was 3.263 W/kg*. As mobile
devices offer a range of functions, they can be used in other
positions, such as on the body as described in the user
manual**.
As SAR is measured utilizing the device's highest
transmitting power, the actual SAR of this device while
operating is typically below that indicated above. This is
due to automatic changes to the power level of the device
to ensure it only uses the minimum power required to
communicate with the network.
* The tests are carried out in accordance with EN 50360, EN
50566, EN 50663, EN 62209-1 and EN 62209-2.
** Please see body worn operation in the user manual.
11