Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ASSEMBLY
ATTACH STEERING COLUMN
6
Hole in the
front axle linkage
Turn the vehicle body on its side.
1. Remove the M5x22 machine screw and Ø5 nut from the steering gear with a screwdriver.
2. Attach the steering gear to the steering box.
3. Insert the straight end of the steering column into the hole of the steering gear.
4. Insert the straight end of the steering column from the bottom up through the hole at the front of the vehicle
(from the bottom and out through the hole on the dashboard).
5. Retighten the M5x22 machine screw and Ø5 nut on the steering gear.
6. Put the bent end of the steering column through the hole in the front axle linkage.
7. Attach the Ø10 washerto the bent end of the steering column.
8. Insert a split pin into the hole of the steering column, bend back the ends of the cotter pin with a pair of
needle nose pliers (not included)
5
4
1
2
Steering Gear Box
Front Bottom View
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
1
3
2
43
Werbung
Inhaltsverzeichnis
Fehlerbehebung
