AsViva EKC4 Betriebsanleitung Seite 38

ASSEMBLY
ATTACH THE REAR SUPPORT & SIDE SUPPORTS
1
1. Fit the rear support on the rear part of the vehicle.
2. Tighten seven Ø4x12 round head screws to secure it with a screwdriver.
3. Fit the side support on one side of the vehicle.
NOTE: If the side support does not fit, replace the other one and try again.
4. Tighten six Ø4x12 round head screws with a screwdriver.
5. Repeat the procedure for the other side.
38
5
3
2
x6
4
x7