Variants Of The Front Mudguard; Mounting The Rear Mudguard - Velmia MUDGUARDS Montagehinweise

12 [AE] ASSEMBLY NOTES
3. Using the front mudguard
The front fender can be used in a total of three variants by indivi-
dually putting the single fenders on to the adapter piece.

4. Mounting the rear mudguard

First, attach the fender to the adapter that will be attached to the
tube later on by screwing it with the nut. Before mounting, make
sure that the seat post has the right thickness for the rear mud-
guard. If that's not the case, you can find several reductions shims
in the packaging that can be placed in between the parts. The
mudguard can then be installed by manually tightening the screws.